Detailed Pentax K-1 camera specifications leaked online

Here are the detailed specifications of the upcoming Pentax K-1 full frame DSLR camera:

36.4MP CMOS sensor, no low-pass filter
Realistic resolution (pixel shift)
Image processing engine PRIME IV
Sensor Size: 35.9 x 24.0mm
Video: full HD 60p
4K interval movie
14-bit RAW
DR II
KAF2 mount (KAF3, KAF2, KAF, KA, compatible with power zoom lens)
AF sensor SAFOX12. 33 AF points (25 points are cross-type), -3EV correspondence
AF assist light
Viewfinder magnification 0.70x, 100% field of view
Focusing screen Natural-Bright-Matte III
LCD monitor 3.2 inches 1,037,000 dots, flexible tilting
GPS built-in
Wi-Fi built-in
Shutter unit: new compact design, durability is 300,000 actuations
Shutter speed: 30 seconds – 1/8,000 seconds, synchro speed is 1/200 sec
Media SD / SDHC / SDXC (UHS-I), dual card slots
USB terminal (USB2.0, micro B), HDMI terminal (type D)
Microphone jack, a headphone jack, X contact
5-axis camera shake correction, 5 stops correction equivalent
Electronic Level
Photometry sensor 86,000 pixel RGB sensor
ISO range: 100-204,800
Continuous shooting: 4.4 fps (full size), 6.5 fps (APS-C)
The number of pictures 70 sheets in the JPEG, 17 shots at the RAW (when full-size 4.4 frames / sec.)
Battery: D-LI90
Battery life: 760 shots
The body is magnesium alloy and stainless steel. Dust and water proof (up to -10 degrees in low temperature)
Size: 136.5 x 110 x 85.5mm
Weight: 925g